Product ID:IONAC A-365
MSDS Date:12/13/1991
FSC:6850
NIIN:00N049695
MSDS Number: BVDGF

SYBRON CHEMICALS INC

BIRMINGHAM, NJ 08011
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 609-893-1100

Cage: 76465

SYBRON CHEMICALS INC,SUB OF SYBRON CORP

66 BIRMINGHAM, NJ 08011 US

Telephone: 609-893-1100

Cage: 76465

2-PROPENOIC ACID, METHYLESTER, POLYMER WITH

CAS: 69011-41-2

Fraction By Weight: 40-50%

OSHA PEL N/K

ACGIH TLV: N/K

HYDROLYZED, REACTION PRODUCTS WITH

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 50-60%

OSHA PEL N/K

ACGIH TLV: N/K

PROPERTIES OF WASTE & FORM OF CERTIFICATION BY

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

BE DEVELOPED THRU APPROP ANALYSIS OF MATL TO BE DISP

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

CERTIFIED LAB FOLLOWING PROCS SET FORTH IN 40 CFR

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

(TCLP) & EP TOX TEST PROC. BASED ON RSLTS OBTAINED

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

ACCOMPLISHED IN ACCORDANCE WITH APPLICABLE FEDERAL,

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: CAN PRODUCE MECHANICAL
IRRITATION TO EYES. MAY CAUSE SKIN IRRITATION OF HYPERSENSITIVE
PERSONNEL. CHRONIC: MECHANICAL IRRITATION TO EYES AND SKIN
IRRITATION TO HYPERSENSITIVE PERSONNEL.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:RED, IRRITATED EYES, ITCHING AND FEELING THAT
PARTICLE EXISTS BETWEEN EYELID AND EYE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH WITH COPIOUS QUANTITIES OF WATER FOR AT LEAST 15
MINUTES. IF IRRITATION PERSISTS, SEE PHYSICIAN. SKIN: FLUSH WITH
COPIOUS QUANTITIES OF WATER FOR 15 MINUTES. IF IRRITATION PERSISTS,
SEE PH YSICIAN. INHALATION: REMOVE FROM EXPOSURE. SUPPORT BREATHING
(GIVE ARTIFICIAL RESPIRATION/OXYGEN) . INGESTION: CALL MD
IMMEDIATELY .

Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL OR WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . GUARD AGAINST CONTACT OF PRODUCT WITH EYES
DURING SALVAGE OPERATION.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:SWEEP AREA OF PRODUCT, COLLECTING IN CONTAINER
FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID FREEZING OR PROLONGED STORAGE
ABOVE 50C BECAUSE PRODUCT CONTAINS WATER WHICH WILL FREEZE AND
DAMAGE PRODUCT OR DRY-OUT ALSO DAMAGING PRODUCT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:WEAR NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:GENERAL VENTILATION SUFFICIENT TO KEEP AIRBORNE
CONCENTRATION BELOW CURRENT EXPOSURE LEVELS .
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPROVED SPLASH GOGGLES .
Other Protective Equipment:LONG SLEEVE SHIRTS AND LONG TROUSERS IS
RECOMMENDED TO PREVENT SKIN CONTACT.
Work Hygienic Practices:FLUSH PROD FROM HANDS W/SOAPY WATER. CARE
SHOULD BE TAKEN TO AVOID CONT W/EYES UNTIL HANDS HAVE BEEN
COMPLETELY (SUPDAT)
Supplemental Safety and Health
HYGIENE PRACT: CLEANED. PROD HAS TENDENCY TO CLING TO SKIN DUE TO
STATIC CHARGE. CARE MUST BE EXERCISED TO REMOVE ALL PROD FROM SKIN.
PROD CAUSES AREAS TO BECOME EXTREMELY SLIPPERY WHEN SPILLED, & CAN
CAUSE FALLS. SWEEP UP SPILLED MATL & TRANSFER FOR PROPER DISP.
WASTE DISP METH: VERIFICATION OF HAZ/NON-HAZ (ING 4)

Vapor Pres:17 @ 20C
Vapor Density:0.62
Spec Gravity:1.1
pH:7-9
Evaporation Rate & Reference:1 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:SPHERICAL BEADS, SLIGHT FISHY ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS SUCH AS NITRIC ACID.
Stability Condition to Avoid:AT TEMPERATURES ABOVE 204C DECOMPOSITION
OCCURS. EXPLOSIVE REACTIONS CAN OCCUR IN PRESENCE OF STRONG
OXIDIZING AGENTS.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
STYRENE AND DIVINYLBENZENE.

Waste Disposal Methods:AS SUPP, NEW/USED ION EXCHANGE RESINS GEN ARE
NOT HAZ & THEREFORE ARE NOT CONSIDERED AS HAZ WASTES. USED RESINS
MAY MEET REG DEFINITION OF HAZ WASTES AS RSLT OF THEIR SERVICE.
(REFER TO 40 CFR 261). R EG AGENCIES & MANY DISP SITES MAY REQ
(SUPDAT)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.